配高效率喇叭仔 not mcot, I like low efficiency big, heavy speakers. This integrated amp might match well with Rogers LS 3/5A, even it is kinda not "loud speakers". However, I did use a 25 Watts power amp years ago, was surprisingly good (Bedini 25/25 + Quad ESL speakers).
The Bedini 25/25 was mostly driving the hi/mid range. Had the Decca ribbon super tweeters and Audio Pro sub-woofer with 100 watt amp build-in. Was the only low power transistor amp I ever used, but very good.
Isn't it makes the Hi Fi World wonderful? hehe....fun , challenging and burning $$ along the way. I actually learned how to design audio circuits in college long ago, the more I knew, the worst it got...and that was not it...I love music and singing....dammmmn !!! LOL..
That was the reason why I added a pair of Decca ribbon super tweeters, it takes over at about 7khz and impedance is kept at 8 ohm or a bit above. In actual listening environment, it adds noticeable harmonics and very lovely. Maybe why Mark Levenson chose Decca for his H.Q.D. system (D for Decca).
Checked the web and The AM10 might not be well build. SMALL toroidal transformer and really tiny filtering caps. Looks like no so good voltage regulation before out-put stage, circuit board looks too simple. I seriouly doubt if the amp will clip at full out-put. Additional specs by manufacture listed below:
35 watts x 2 channels into 8 ohms (20-20,000 Hz), 0.15% THD at 80% of rated power
signal-to-noise ratio: 82 dB
large toroidal power transformer for low noise and high-current output
5 RCA audio inputs, including a phono input for connecting a turntable
front-panel minijack input for connecting a portable music player
RCA record output
full-size headphone jack
one pair of binding-post speaker terminals
sleek brushed aluminium exterior
remote control
16-15/16"W x 2-15/16"H x 14-5/16"D
weight: 12.3 lbs.
warranty: 3 years
auraheart 發表於 2013-9-18 04:19
I can't agree more, but clipping could also destroy speaker drivers and cross-over due to over hea ...
35Wpc doesn’t sound like a lot of power. But let’s put this in context. Amps only know they’re small in a big room or with the wrong speaker. Shackled to a low-sensitivity loudspeaker in a palatial listening room and urged to perform routinely in the 95dB+ range, we would indeed have a Houston-level problem. But that’s not the AM10’s job description. The AM10 exists for the smaller application—to provide high-level musicality in tighter confines.
樓主: 柒喜
在線雷達
發表於 2013-9-16 23:22:55
發表於 2013-9-16 23:54:33
多年前聽過舊款ESL，人聲和小品無敵，低頻乾淨快速，但量稍嫌不夠，聽大型差點點，可而且ohm數會跌，幾考功放，水塘弱D都比佢扯乾
