|
樓主 |
發表於 2011-12-24 12:07:29
|
顯示全部樓層
本帖最後由 lionken07 於 2011-12-24 12:10 編輯
It wasn't too bad. Basically all you do is break it down by steps:
1. Take the wheels off the car.
2. Clean them good.
3. Sand it down with sandpaper (take your time with this)
4. Clean some more and then let it dry.
5. put index cards around tire/wheel area.
5. Apply at least 3 coatings of primer (wait 3 hours between each application)
6. Apply at least 6 coatings of color (pink in this case, and wait 3 hours between each also)
7. Apply at least 3 coatings of clear coat. (this will protect the wheels and wait 3 hours as well).
8. Enjoy the new color! :) |
|